X101532E
16
4.10 Tilting
*)
easy-tilt
easy-tilt electronic
*)
Open the appliance lid.
Turn the manual wheel (
1
) or the rotating wheel (
2
) in the desired direction
to tilt the cooking chamber.
If you start a process
(
D
) when the basin is not in
the horizontal position, the system message on the
right will appear. Operation is not possible until you
have put the basin in the horizontal (level) position
with
(
B
).
Adapt the tilting speed to the cooking chamber fill level.
Do not put any additional pressure on the basin front
edge during tilting process. Danger of scalding by hot
food!
During tilting limbs or objects can be pinched or squashed in the area
between the basin and the console. Make sure this area is free before
operation.
Danger of burning! Accidental or jerky tilting can cause food or fat to
overflow.
4.11 ELRO PMS, Power Management System
With the ELRO PMS (
P
ower
M
anagement
S
ystem), you can reduce
energy and installation costs
. Three
to twelve appliances can be connected to a PMS system. The appliances share the specified total
connected load amongst each other. The result is a 30% reduction of the connected load of the appliance
group.
You can identify the appliance being temporarily operated with a reduced connected
load (PMS active) thanks to the blinking temperature display on control 90. Please
note that with PMS, the heating system can be temporarily switched off.
When the power supply and/or the communication line of an appliance in the PMS
group was interrupted for two weeks (14 days), error 26 appears on all appliances in
the PMS group when they are switched on. You must acknowledge this message with
keys (
1
), (
2
) or (
3
). Then you can start operating the appliance as usual. It is
recommended to have the data line be checked by the responsible person (IT
department, electrician) to make sure that the total connected load for the PMS group
is not exceeded.
4.12 Power limitation system LBS
*)
on site
This appliance can be prepared for connection to an external LBS system
*)
. The aim of such a system is to
reduce electrical power consumption. Time-staggered release of the output connections for appliances with
high connection values prevents exceeding of the average maximum permitted connection value for an
object (e.g. kitchen) within a given measurement period (e.g. 15 minutes). You can identify LBS system
*)
intervention thanks to the blinking temperature display on control 90. Please note that with LBS
*)
, the
heating system can be temporarily switched off. In order to avoid unnecessary deterioration of appliance
control modes, please adhere to the standard values established in the General Remarks/Installation Plan
for heating systems
– minimum switch on and maximum switch off time.
4.13 Power interruption
All the ELRO Series 2300 appliances can bypass brief power interruptions up to 30 seconds. Therefore
cooking processes in progress are not affected.
4.14 Power failure
If power interruptions exceed 30 seconds, the appliance switches off. After switching on with
(
A
), the
settings of the last active process are available.
Start process with
(
D
).
1
2
