Remote Control Programming User’s Guide
PM024A02 Rev.2
22
is executed. When program is finished, then XRAM at location should be
modified. XRAM contents can be read by pressing the
Read XRAM Block
button.
To make a test do following steps (from the beginning):
1. FPA List
2. Initialization
3. Setup File
4. Power from FPA - Enable
5. Open Target
6. Write XRAM Block
7. Read XRAM Block ( remember XRAM contents)
8. Set PC and RUN
9. Read XRAM Block ( compare with the contents from point 7 ).
On the right part of the dialogue screen are located buttons with encapsulated functions
like Autoprogram, Erase Flash etc. Encapsulated functions are not requires to call the
F_Open_Target_Device()
function. All functions, including “Open..”, “Close...” are build-in
inside the encapsulated functions (see chapter 4 for details).
Summary of Contents for FlashPro-CC
Page 10: ...10...
