background image

 

 

 

Elproma Elektronika Sp. z o.o. 
ul. Szymanowskiego 13 
05-092 Łomianki k/Warszawy 

       E-mail: 

[email protected]

 

             

Tel. +48 (22) 751 76 80

 

 

www.teleorigin.com

 

 

29 

The Python script is executed in a task with the lowest priority on the Telit module, so 

it’s execution  won’t  interfere  with  GSM/GPRS  normal  operations.  Furthermore,  this  allows 
serial  ports,  protocol  stack  etc.  to  run  independently  from  the  Python  script.  The  Python 
script  interacts  with  the  Telit  module  functionalities  through  several  built-in  interfaces,  as 
depicted below: 

 

The  MDM  interface

  is  the  most  important  one.  It allows  the  Python  script  to 

send AT commands, receive responses and unsolicited indications, send data 
to  the  network  and  receive  data  from  network  during  connections.  It  is  quite 
similar  to  the  regular  serial  port  interface  on  the  Telit  module.  The  only 
difference  being  that  this  interface  is  an  internal  software  bridge  between 
Python and module internal AT command handling engine, and not a physical 
serial port. All AT commands working on the Telit module are working with this 
software interface as well. 

 

The MDM2 interface 

is the second interface between Python and the module 

internal AT command handling. It’s purpose is to send AT commands from the 
Python script to the module and receive AT responses from the module to the 
Python script when the regular MDM built-in module is already in use. 

 

The  SER  interface 

lets  the  Python  script  to  read  from  and  write  to  the 

physical serial port ASC0, usually the default port to send AT commands to the 
module  (e.g.  to  read  information  from  an  external  device).  When  Python  is 
running,  this  serial  port  is  free  to  be  use  by  the  Python  script  since  it  is  not 
used as the AT command interface; the AT parser, in fact, is mapped into the 
internal virtual serial port. No flow control is available from Python on this port. 

 

The  SER2  interface 

lets Python script to read from and write to the physical 

serial port ASC1, usually the default port for tracing and debugging. 

 

The  GPIO  interface 

lets  the  Python  script  to  handle  general  purpose  input 

output  faster  than  through  AT  commands,  skipping  the  command  parser  and 
controlling directly the pins. 

 

The MOD interface 

is a collection of useful functions 

 

The  II2  interface 

is  an  implementation  on  the  Python  core  of  the  IIC  bus 

Master. It allows Python to create one or more IIC bus on the available GPIO 
pins.

 

 

 

The  SPI  interface 

is  an  implementation  on  the  Python  core  of  the  SPI  bus 

Master. It allows Python to create one or more SPI bus on the available GPIO 
pins. 

 

The GPS interface 

is the interface between Python and the module’s internal 

GPS controller. Its purpose is to handle the GPS controller without the use of 
dedicated AT commands through the MDM built-in module. 

 

Visit Python official web site for more information 

http://www.python.org/

. More information 

can be found also in 

Telit_Easy_Script_Python.pdf

 [6] 

 

Summary of Contents for RB865io







































Reviews: