6.0 INFRARED REMOTE CONTROL
The unit is equipped with a receiver for the infra-red remote control. This must be
ordered separately.(Code IRTZ05).
WARNING
The remote control is of the self-learning type. After inserting the batteries
and each time these are changed, press the "Set" key for a few seconds
WARNING
IR remote control reception is enabled and disabled
holding down the MODE button of TZ05 at power-on
The TZ05 is factory set with the remote control enabled
The following functions can be carried out using the IR remote control:
Save
+ IN 1
÷
4
Save a configuration (together with the IN keys 1
÷
4)
Recall + OUT 1
÷
4
Recall a configuration (together with the OUT keys 1
÷
4)
WARNING
Recall of a preset from the keypad, from computer or using
the remote control also sets the same configuration as restart
IN keys 1
÷
4
Input selection (or selection N° Save )
OUT keys 1
÷
4
Output selection (or selection N° Recall)
A, V, A+V, Lock
Setting of switching mode
MUTE ON OFF
Sets Mute on the monitoring audio output
WARNING
The INPUTS-OUTPUTS sequence must be complied with also using the
remote control, i.e. select first of all the source and then the destination.
diagram:
TZ05
4X4+1 VIDEO AND AUDIO MATRIX
ELPRO BROADCAST s.r.l.
Strada della Pronda 17 - TORINO (ITALY)
Tel. 0117071955 - FAX 011706210
9
8
T
O
T
Z
05
T
O
C
O
M
P
U
T
E
R
