3.0 SETTINGS
The unit does not have internal presettings.
WARNING
All maintenance operations must be carried out by qualified personnel who
must be informed of the risks of electric shock. Do not open the cover of the
unit without first of all removing the power cable.
4.0 INSTALLATION
a) Make sure that all the units to be installed are off.
b) Connect the video sources and destinations according to the screen-printed
instructions on the rear panel.
c) Connect a monitor to the fixed preview output identified as VIDEO PREVIEW
WARNING
The unit will perform the switching in the
frame interval of the signal on input 1
To assure switching without release,all the sources
must be synchronous with the signal on input 1.
d) Connect the audio sources and destinations according to the screen-printed
instructions on the rear panel.
If a system of active loudspeakers is available, this can be connected to the fixed
preview output designated AUDIO PREVIEW.
e) Power on the appliances. The unit will be set to the factory configuration which
connects inputs and outputs with the same number or in the customized
default
configuration or in the last preset recalled from keypad or from computer.
WARNING
To save a configuration and activate this at the next power-on,
press the MODE button for 2 seconds.
A flash of the two built-in leds indicates that the
configuration has been saved.
Subsequent recalls of presets from keypad or computer modify the default
configuration which will correspond to the last preset recalled.