SDZ16
16x16 SD & AUDIO MATRIX
5.1 SWITCHING OF THE SIGNALS
The video and audio outputs of the unit can be controlled using the console
on the front panel.
a) Press the SOURCE /
DEST button to proceed
with the source selection.
On the right of the first
) If the function mode is
Press one of the 16
WARNING
It’s possible to select more than one sources consecutively. This is extremly
) Press INPUT / OUTPUT BUTTON to abilitate the destination source.
) Press one of the 16 INPUT / OUTPUT buttons to select the destination.
WARNING
It’s possible to select more than one destinations consecutively without any
Press the TAKE to effectuate the switch that will be confirmed by the
display line will appear :
AV or A or V in base of
the function mode and S
b
not the one desired,
press MODE button until
the relative writing will
appear on the display
c)
INPUT / OUTPUT
buttons to select the source. The selection will be visualized on the display.
helpful when PREVIEW is set on the 16th output to monitorize the sources
without any switching. (see paragraph 5.2 and 6.8)
d
On the right side of the second display line will appear a D character :
e
The selection will be visualized on the display.
switching. The switch will be decided pressing the TAKE button.
f)
visualization on the display.
ELPRO Video Labs s.r.l.
Strada della Pronda, 45/B 10142 TORINO – ITALY
Tel.+39 0117701583 – Fax +39 011703751
8
