SDZ16
16x16 SD & AUDIO MATRIX
6.12
REQ
UEST OF FIRMWARE RELEASE IDENTIFICATION
The host must send the following sequence:
i followed by CR where: i is the character Hex 69
The SDZ16 matrix replies:
i (Hex 69)
b byte highly identifiable unit
(Hex 62, in case of SDZ16)
Z byte low identifiable firmware release (from 0 to 9)
CR
Example:
I f replied 69 62 31 that unit is a S DZ 16 ( H ex 62) and the uploaded firmware is release
number 1 ( H ex 31).
7
.0
LAN CONTROL
It’s possible to control the SDZ16 through LAN,using the same protocol as in
case of the RS232. SDZ16 requires the optional LAN202 for the LAN control
possibility. To set the LAN parameters and the SDZ16 available to the
existing network, please refer to our web site and download from the
Software Down Load section the application related to the Product LAN202:
http://www.elprovideolabs.com/dwnload/LAN202usermanual-ita.zip
for the
italian version or
http://www.elprovideolabs.com/dwnload/LAN202usermanual-eng.zip
for the
english version.
The same user manual describes the procedures to follow for the creation af
a virtual COM that allows connecting through LAN your PC to the SDZ16.
An Elpro Management software able to set the COMs paramaters, respecting
the settings of a previously created COM, is available to be installed and
activated on your PC.
19
ELPRO Video Labs s.r.l.
Strada della Pronda, 45/B 10142 TORINO – ITALY
Tel.+39 0117701583 – Fax +39 011703751
