DVIPRO1000
8x2 UNIVERSAL SCALER MATRIX SWITCHER
& EFFECT CONTROL
9
ELPRO Video Labs s.r.l.
St.da della Pronda, 45/B 10142 Torino ITALY
Tel.+39 0117701583 – Fax +39 011703751
9
The main commands for functioning of the DVIPRO1000 can be carried out
from the local keyboard.
Machine keyboard
4.0.1 lighting keys
In order to give a better and quicker intellegibility of the system , each key has
An internal red/green/yellow light , with the following scheme;
-
Keys from 1 to 8 for both the Out channels : in each row , the
green light is for the Main input , while the red light is for the Pip
input . During the switching phase , the new channel will blink. If both
Main and Pip inputs are the same , then the light will be yellow
(red+green). If Pip is disabled , the red light brightness is lower. In
Mixer and cut modes , the channel Key will blink yellow during the
preparing phase , then it will become green when it is ready to
switch,
-
Format key : it will blink during the format selection , together with
the channel key (1 to 8) in programmino.
-
Overlay key : red or green or yellow upon the state of the overlay on
the channels (yellow = both channels)
-
Save/Recall key: yellow light during these modes
-
Preview key 1
2: it blinks yellow during the transfer of the
configuration from OUT1 to OUT2 : also the interested channel keys
of the second row will blink
-
Resolution key: green or red upon the channel which is interested
in the resolution changing. (green OUT1 , red OUT2)
