Chapter Five
Specifications
Man_805U Rev 1.8
Page
41
Configuration of Error Checking
Error-checking is normally disabled for transparent mode, and normally enabled for
controlled mode. The configurations for transparent and controlled modes above follows this
convention. However you are able to override this.
AT&E
CRC Error Checking
&E0
Disable CRC Error Checking (default)
&E1
Enable CRC Error Checking
View Configuration
The AT&V command will output to the terminal a listing of all configuration settings.
AT&V
Show all settings including S registers
&V0
Same as AT&V
&V1
Only show settings that are
different from the defaults.
Transmit and Receive Hold-off times
Transmit holdoff
ATS16=x
where x is the delay time in msec (0 – 255)
For example, ATS16=200 results in a transmit holdoff delay of 200msec.
Receive holdoff
ATS15=x
where x is the delay time in msec (0 – 255)
For example, ATS15=80 results in a receive holdoff delay of 80msec.
