805U-E Wireless Ethernet
User Manual
Man_805U-E Rev 1.5
Page 46
3.14
Digital Input/Output and I/O Transfer
In firmware versions v1.28 and earlier, the menu item was named Digital Input/Output. In
later versions it was renamed I/O Transfer, due to enhanced functionality where units can
send the status of the Digital Input to another module or Modbus device.
The shared Digital Input/Output pin may be monitored and set via the internal webpage. As
this pin is shared, the Digital Input status will be ON when the Digital Output is set ON.
The Digital I/O channel can also be configured to provide a status output of the module
communications. If the 805U-E disassociates from another unit (that is, there is no wireless
link), you can configure the digital output to turn ON (set) or OFF (drop).
