Auto Gate System
EL-EX5A
Induction motor (AC)
13, 14
Optional terminals for the motor’s capacitor.
15, 16, 17
Connect to induction motor (1 HP max); terminal 17 is the common point.
Automatic lighting
18
Output is 230VAC. It is always on whenever the gate is opened fully or partially.
It will be off after it is closed shut. If there is a manual switch to it, ensure same power phase is
used.
Main Power Supply
19, 20
Terminal 20 is the Live input and terminal 19 is the Neutral point. This connection must be
followed if pillar lighting is used. Nominal mains power is 230VAC, 50Hz
Auto close function
P3
Auto close is cancelled if jumper is set at NO position. If set to YES position, the gate will
automatically start to close in 30 seconds after it has opened fully.