Elo TouchSystems ET1725L Series, User Manual

Page: 155 / 192

MagTek Device Drivers for Windows
56
5. Select MagTek from the list of Hardware Types, then click the Next button.
6. Select the device to be installed from the displayed list box and click the Next button.
7. Click the
Finish
button. The computer will take a moment to install the driver. Please be
patient. If the installation file cannot be found, click Browse and point to where the
installation file (oemsetup.inf) is located; click the
OK
button on the dialog box.
8. If the computer displays a message stating “System Settings Change” and requests that
you restart the computer, please do so.
9. Continue with
Completing the Installation (W95/98/ME)
below.
Updating an Installed Device Driver (W95/98/ME)
When a newer version of a driver is available, use these steps to update it:
1. Start Windows.
2. Right-click on My Computer on the desktop or open the Control Panel and double click
on the System icon then select Properties .
3. Click on the Device Manager tab.
4. Click on the plus sign in front of the MagTek list item to expand it.
5 Double click on the driver to be updated or click once on the driver then click the
Properties button.
6. Click on the Driver tab.
7. Click on the Update Driver button.
8. Select the
No
radio button when asked if you want Windows to search for your new
hardware and click the
Next
button.
9. Select
MagTek
from the list, if shown, then click the
Next
button.
10. Select the device to be installed from the displayed list box and click the Next button.
11. Click the Finish button. The computer will take a moment to install the driver. Please be
patient.
12. If the computer displays a message stating “System Settings Change” and requests that
you restart the computer, please do so.
13. Continue with Completing the Installation (W95/98/ME) below.
Completing the Installation (W95/98/ME)
The Windows Add New Hardware Wizard will install the selected driver. If this is the first time
a MagTek device driver is installed, it will also add the
MagTek device class in the Device
Manager.
When the installation has been completed, the device configuration property sheet will be
displayed (the window title is
Installed Device
). Perform the following steps to configure the
device: