background image

 

W

ARRANTY

 

 

 
 

Except as otherwise stated herein or in an order acknowledgment delivered to Buyer, Seller 

warrants to Buyer that the Product shall be free of defects in materials and workmanship. The 

warranty for the touchmonitors and components of the product is 3 (three) years.

 

Seller makes no warranty regarding the model life of components. Seller’s suppliers may at any 

time and from time to time make changes in the components delivered as Products or 

components.

 

Buyer shall notify Seller in writing promptly (and in no case later than thirty (30) days after 

discovery) of the failure of any Product to conform to the warranty set forth above; shall describe 

in commercially reasonable detail in such notice the symptoms associated with such failure; 

and shall provide to Seller the opportunity to inspect such Products as installed, if possible. The 

notice must be received by Seller during the Warranty Period for such product, unless 

otherwise directed in writing by the Seller. Within thirty (30) days after submitting such notice, 

Buyer shall package the allegedly defective Product in its original shipping carton(s) or a 

functional equivalent and shall ship to Seller at Buyer’s expense and risk.

 

Within a reasonable time after receipt of the allegedly defective Product and verification by

 

Seller that the Product fails to meet the warranty set forth above, Seller shall correct such

 

failure by, at Seller’s options, either (i) modifying or repairing the Product or (ii) replacing the 

Product. Such modification, repair, or replacement and the return shipment of the Product with 

minimum insurance to Buyer shall be at Seller’s expense. Buyer shall bear the risk of loss or 

damage in transit, and may insure the Product. Buyer shall reimburse Seller for

 

transportation cost incurred for Product returned but not found by Seller to be defective. 

Modification or repair, of Products may, at Seller’s option, take place either at Seller’s facilities 

or at Buyer’s premises. If Seller is unable to modify, repair, or replace a Product to conform 

to the warranty set forth above, then Seller shall, at Seller’s option, either refund to Buyer or 

credit to Buyer’s account the purchase price of the Product less depreciation calculated on a 

straight-line basis over Seller’s stated Warranty Period.

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

 

29

 

Summary of Contents for 1715L



































Reviews: