The lower display brackets must be installed using the center
mounting hole of the mounting pad and the left/right mounting
hole.
Upper Display Bracket
I/O Connections must point towards
the floor when wall mounted
Step 3b: Attach upper and lower display brackets (Portrait orientation)
• Secure the upper display bracket to the upper mounting pads using four M6x8 screws.
• Secure each of the lower display brackets to the other two mounting pads using two M6x8
screws. Ensure the lower brackets are installed according to notes 3-4 below.
• Proceed to step 4.
Loosely install an M4 screw into
each lower bracket as shown.
Leave about 5mm (1/4”) of
space under the head. The M4
screw on the left bracket should
point left and the M4 screw on
the lower right bracket should
point right.
Note 3
Note 4
Mounting pads
1/4” (5mm)
Lower Display Bracket
