background image

© 2016 Elo Touch Solutions, Inc. All rights reserved.

Elo Touch Solutions Technical Support

 

Online self-help: www.elotouch.com/go/websupport

Technical Support contacts in your region:

 

www.elotouch.com/go/contactsupport

The information in this document is subject to change without notice. Elo Touch Solutions, Inc. and its Affiliates (collectively 

“Elo”) makes no representations or warranties with respect to the contents herein, and specifically disclaims any implied 

warranties of merchantability or fitness for a particular purpose. Elo reserves the right to revise this publication and to 

make changes from time to time in the content hereof without obligation of Elo to notify any person of such revisions or 

changes.

No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into 

any language or computer language, in any form or by any means, including, but not limited to, electronic, magnetic, 

optical, chemical, manual, or otherwise without prior written permission of Elo Touch Solutions, Inc.

Elo (logo) and Elo Touch Solutions are trademarks of Elo and its Affiliates.

North America

 

Elo Touch Solutions 

1033 McCarthy Boulevard

 

Milpitas, CA 95035

800-ELO-TOUCH 

Tel +1 408 597 8000 

Fax +1 408 597 8050 

[email protected]

Europe

 

Tel +32 (0)16 70 45 00

 

Fax +32 (0)16 70 45 49

 

[email protected]

Asia-Pacific

 

Tel +86 (21) 3329 1385

 

Fax +86 (21) 3329 1400

 

www.elotouch.com.cn

Latin America

 

Tel 786-923-0251 

Fax 305-931-0124 

www.elotouch.com

Safety Warning:

Do not install this equipment on any wall or structure that is not capable of supporting four times 

the weight of the IDS Display, brackets, and any accessories attached to it. 

The 3202L monitor weighs in excess of 37lbs (17kg) with the optional Elo computer module. 

37lbs x 4 = 148lbs (68kg). 

The 4202L monitor weighs in excess of 55lbs (25kg) with the optional Elo computer module. 

55lbs x 4 = 220lbs (100kg). 

The 4602L monitor weighs in excess of 60lbs (27kg) with the optional Elo computer module. 

60lbs x 4 = 240lbs (108kg). 

Do not leave out any required parts or leave the monitor on the wall unattended without securely 

fastening all brackets and screws as instructed in this document. Failure to follow all installation 

instructions can result in an unsafe installation. Serious injury can occur if the IDS Display unex-

pectedly falls due to improper installation.

Caution

: This wall mount is intended for use only with the maximum weights indicated. Use with 

heavier than the maximum weights indicated may allow the IDS Display to fall and cause injury.

Summary of Contents for Elo 3202













Reviews: