User Manual
–
IDS01
SW601990 Rev. M, page 14 of 47
Section 4: Operation
Power
To turn the touchmonitor on or off, press the touchmonitor power button once. If a computer module is installed, then
the computer module will also turn on with the monitor.
To abruptly power off the computer module and touchmonitor, press and hold the touchmonitor power button until
the computer shuts off.
To gracefully shut down the computer module, follow the computer modules operating systems normal power off
procedure.
Power Status LED on the OSD Remote functions according to the following table:
TouchMonitor/Computer Module Status
LED Status
OFF
OFF
SLEEP
PULSING
ON
ON
The system consumes low power when in SLEEP and OFF modes. For detailed power consumption specifications,
refer to technical specifications on the Elo website http://www.elotouch.com
Touching the screen will bring the attached host PC out of SLEEP mode (similar to moving the mouse or pressing a
keyboard key).
To improve reliability and reduce wasteful power consumption, disconnect the AC power cable from the monitor
when long periods of disuse are planned.
Summary of Contents for 01 series
