Elnur
powered by Gabarrón | RFE PLUS | Installation Guide
3
2: INSTALLATION INSTRUCTIONS
Position and fix the brackets at the correct distance
from the floor. It is possible to use the radiator as a
measuring unit by positioning it on the polystyrene
packaging and placing two supports above as
indicated on the figure (shown right).
- The studs and screws to attach the supports are
in the accessories bag.
- Hang the unit on the hooks of the brackets.
- By turning the screws, the metallic square will go
downwards, retaining the heater. Repeat this on
the other bracket.
- Open the package and check that it is the correct
model and it is in good condition.
- To obtain optimum performances it is necessary to
maintain a minimum clearance of 15 cm between
the radiator and any flammable material such as
furniture, curtains etc.
- The rest of clearances required to maintain are
indicated on the figure opposite:
