background image

 

 

EN 

Follow the below instructions for the installation of the G Control PM power meters. (PV generation and 
home consumption) 

 

Disconnect the main switch of the consumer unit prior to the device installation. 

Disconnect the inverter and the PV generation before the device installation. 

 

Warning:

 The G Control PM is valid only for single-phase installations. 

The G Control PM device is prepared to be installed in the consumer unit of your home.   

a.

 

Install the device on the DIN rail in the consumer unit of your home. 

b.

 

Connect the device using the appropriate wiring to a 230 V power supply. 

c.

 

Connect the clamp energy meter to the G Control PM device and embrace: 

 

1.  Home consumption meter. The main cable at the output of the main switch to record the total 
energy consumption.  

Warning:

 The home consumption meter is installed measuring the total consumption of the 

home as it is shown in the diagram of the previous page. It must not be installed in the same point 
than the company smart meter.  

2. PV Generation meter. The line connection cable from the PV inverter to the consumer unit of 
your home to register the PV generation. 

 

2.2. G Control Hub EU Smart-box installation. 

1.

 

Connect the G Control Hub to internet using the supplied ethernet cable. 

2.

 

Connect the G Control Hub to the electricity supply using the supplied power adapter. 

3.

 

Wait and check the status of LED lights to confirm the correct connexion between the G Control 
Hub and the router. 

LEDS Status 

Description 

Green off, orange blinking every 

second. 

G Control Hub in discovery mode for devices being associated. 

Orange on, green blinking very fast 

The router does not assign a valid IP to the G Control Hub. 

Orange on, green blinking every    

5 seconds 

A valid IP is assigned to G Control Hub, but there is no 

communication with the server. 

Orange on, green alternating every 

5 seconds 

A valid IP is assigned to G Control Hub and it communicates 

successfully with the server. 

 

 

RF SIGNAL 

Summary of Contents for SOLAR BOX USB

















Reviews: