12
EN
Press “Star Search” button and use a clip to press the small button
placed at the top of the meter.
You can check that the meter has been linked by looking at the device LED.
LEDS Status
Description
LED off
Not linked
LED flashing every 2 seconds
Correctly linked
LED flashing every half a second
Correctly linked with the G Control
Hub, but currently lost the connection
The last step is to set a name for the meter and select the type
of circuit to indicate if the meter that is being linked is PV
generation or home consumption meter.
These settings can be modified later in the Config section of
the G Control Power Meters.
Once linked both meters, the installation of the SOLAR BOX
has finished.
4. TROUBLESHOOTING
G Control HUB EU does
not connect to the
internet.
Check the LEDS light of the hub that indicates the connection status.
Check the power supply and the internet connection. An internet
connection without a proxy and the ports 123UDP, 5000TCP and 5001
TCP opened are required. Router must have DHCP option activated.
Summary of Contents for SOLAR BOX USB
Page 14: ...13 NOTAS NOTES...
Page 15: ...14 NOTAS NOTES...
