ELNEC s.r.o.
Display settings...
Display
e invert display mode
”. When the
checkbo
scre
inverted
” mode. Otherwise it will
be displa
l mode.
C
settings dialog contains check box “
Us
x is checked, LCD
en will be displayed in “
yed in norma
Touchpad calibration...
ommand is used for calibration of built-in touch pad, part of built-in LCD touch screen.
The calibration of touchpad is recommended if you encounter unexpected reactions
alibration with Yes button,
blank screen with point
uired number of points, touchpad calibration is complete, which will be
ayed.
from touchpad. If user confirms dialog about touchpad c
alibration procedure will start. Calibration procedure will show
c
displayed. User has to click on the point with stylus. There will be sequentially displayed
w points at different positions. Each of the point has to be clicked by user. After
fe
clicking req
announced by information message displ
Sounds...
34