68
Changing the foot
This foot is comes with the closed-toe foot attached,
however, it is convertible to the open-toe foot and clear
view foot.
To change the foot, raise the foot and turn the round nut
to bring the foot to the lowest position.
Remove the setscrew and remove the closed-toe foot.
Attach the desired foot and secure it with the setscrew.
Adjust the height of the foot (refer to page 67).
q
Setscrew
w
Closed-toe foot
e
Open-toe foot
r
Clear view foot
Sewing
Baste or pin the quilt layers. Draw a quilt design on the
top fabric with a washable maker.
Sew at medium speed while guiding the quilt layers with
your hands.
Move the quilt layers 3 mm (1/8˝) or less per stitch.
q
w
e
r
Free-quilting with darning foot PD-H
Use the darning foot PD-H when sewing following stitch
patterns:
CAUTION:
Do not select any pattern other than the straight stitch
with left needle position when the closed-toe or open-
toe foot is attached.
Do
not move the quilt layers toward you when the
open-toe foot is attached.
NOTE:
A message appears when starting the machine with
the feed dog lowered.
Start sewing again to proceed sewing.
Free Motion Quilting (2)
Machine settings
q
Pattern:
MODE 1: 1, 1S, 4, 7
MODE 2: 01, 04, 07, 12
w
Thread tension:
AUTO
e
Presser foot:
Darning foot PD-H
r
Foot pressure:
5
t
Feed dog:
Lowered
q
e
w
r
t
The sewing procedure is the same as the free motion
quilting (1) (see above).
Mode 1:
Mode 2:
Summary of Contents for eXcellence 730
Page 1: ...Instruction Manual eXcellence 730...
Page 2: ......
Page 95: ......
Page 96: ...858 800 780 EN...
