Elmwood Bonneville 50 Owner'S Manual Download Page 4

 

PRECAUTIONS & WARNINGS
 

 
 
 

PRECAUTIONS & WARNINGS  

 

 
Always follow the safety instru
 

 

  Read this manual carefully before switching on your amplifier.

 

  Do not try to open the amplifier chassis 

 

  Vacuum tube amplifiers generate heat. Insure proper ventilation.

Keep away from curtains or any flammable objects.

 

  Do not expose the amplifier to rain, moisture, or any kind of water or liquids. 

Never use the amplifier in wet condition.

 

  Do not block ventilation openings on the rear of the amplifier. 

 

  Never operate the ampli

since this can cause severe damage to the amplifier.

 

  Always insure that amplifier is properly grounded.

 

  Always unplug power cord before changing fuses or any tubes. When replacing 

fuse, use only same type and rati

 

  Keep children away from the amplifier.

 

  Be sure to always connect an AC power supply that corresponds to the amplifiers 

power supply specification / setup.

 

  Always turn off the power of all related equipment bef

 

  Make sure that you are using a correct speaker cable for the speaker outputs. 

Low signal cables, such as regular guitar cables, might seriously damage the 
output stage of the amplifier. 

 

  Always remove power plug from the wall 

occurring nearby or if not used for longer periods.

 

  Always treat your amplifier with caution and never use excessive force.

 

  Never use solvents for cleaning. Wipe of the exterior with a soft cloth.

 

  Your amplifier can create high sound volumes. Do not exposure yourself to high 

sound volumes that may cause permanent hearing damage. 

 
 

 

PRECAUTIONS & WARNINGS 

PRECAUTIONS & WARNINGS   

Always follow the safety instructions listed here and use common sense.

Read this manual carefully before switching on your amplifier. 

Do not try to open the amplifier chassis – there are no serviceable parts.

Vacuum tube amplifiers generate heat. Insure proper ventilation. 

y from curtains or any flammable objects. 

Do not expose the amplifier to rain, moisture, or any kind of water or liquids. 
Never use the amplifier in wet condition. 

Do not block ventilation openings on the rear of the amplifier.  

Never operate the amplifier without a connected speaker or load 
since this can cause severe damage to the amplifier. 

Always insure that amplifier is properly grounded. 

Always unplug power cord before changing fuses or any tubes. When replacing 
fuse, use only same type and rating. Avoid direct contact with heated tubes.

Keep children away from the amplifier. 

Be sure to always connect an AC power supply that corresponds to the amplifiers 
power supply specification / setup. 

Always turn off the power of all related equipment before making any connections.

Make sure that you are using a correct speaker cable for the speaker outputs. 
Low signal cables, such as regular guitar cables, might seriously damage the 
output stage of the amplifier.  

Always remove power plug from the wall socket if there is any risk of lightning 

nearby or if not used for longer periods. 

Always treat your amplifier with caution and never use excessive force.

Never use solvents for cleaning. Wipe of the exterior with a soft cloth.

can create high sound volumes. Do not exposure yourself to high 

sound volumes that may cause permanent hearing damage.  

listed here and use common sense. 

there are no serviceable parts. 

Do not expose the amplifier to rain, moisture, or any kind of water or liquids.  

Always unplug power cord before changing fuses or any tubes. When replacing 

ng. Avoid direct contact with heated tubes. 

Be sure to always connect an AC power supply that corresponds to the amplifiers 

ore making any connections. 

Make sure that you are using a correct speaker cable for the speaker outputs. 
Low signal cables, such as regular guitar cables, might seriously damage the 

socket if there is any risk of lightning 

Always treat your amplifier with caution and never use excessive force. 

Never use solvents for cleaning. Wipe of the exterior with a soft cloth. 

can create high sound volumes. Do not exposure yourself to high 

Summary of Contents for Bonneville 50














Reviews: