CAUTION! It is possible that the manufacturer of the vehicle may change the wiring
without notice! Make sure that the polarity of the cables for the power supply is
correct. The polarity of connector 1 (power supply) on the circuit board is clearly
marked with + and -.
CAUTION! The ElMod M16 board features a battery protection which should be set
accordingly to the used battery type. See chapter "battery protection" for details.
•
Connect the rear light to connector 4. Option: the front light is attached directly to
the drive motor in the model and lights up as soon as the vehicle moves forward. If
the supply lines for the front lighting are separated from the main motor, they can be
attached to connector 3 with the supplied 2-wires cable. This allows the front light
to be switched on and o
ff
via the remote control. In addition, the brightness can be
changed via the
ElMod App
.
Page 3
