Elmo SimplIQ Series, Installation Manual

Page: 71 / 73

Solo Guitar Installation Guide Technical Specifications
MAN-SOLGUIIG (Ver. 1.404)
www.elmomc.com
71
4.7.4. Brake
The brake can be controlled by Digital Output 1.
Digital Output 1 should be set to Brake.
Feature Details
Rated voltage 24 V +10%
Rated current 0.5 A
Input power 12 W
4.7.5. Analog Input
Feature Details
Maximum operating differential voltage ± 10 V
Maximum absolute differential input voltage ± 16 V
Differential input resistance 3.74 k Ω
Analog input command resolution 14-bit
4.8. Communications
Specification Details
RS-232
Signals:
• RxD , TxD , Gnd
•
Full duplex, serial communication for setup and control.
• Baud Rate of 9,600 to 57,600 bit/sec.
CAN
CAN bus Signals:
•
CAN_H, CAN_L, CAN_GND
• Maximum Baud Rate of 1 Mbit/sec.
Version:
•
DS 301 V4.01
Layer Setting Service and Protocol Support:
•
DS 305
Device Profile (drive and motion control) :
•
DS 402