Elmo PTC-100S, Instruction Manual

Page: 24 / 28

- 23 -
The Camera can be controlled from the PC by connecting the RS-232C terminal to the PC.
Note: Before starting the connection work, be sure to turn OFF the power
supply to all equipment to protect the Camera and the PC.
Transmission specifications
• Full duplex start-stop sync.mode.
• Start bit :1 bit
• Data bit :8 bits
• Stop bit :1 bit
• Parity bit :None
• X parameter :None
• Baud rate (Communication speed) :9600bps
• Electric interface :RS-232C (Mini DIN 8P connector)
• Flow control :None
• Cable specifications :Dedicated cable
Pin assignment
8. RS-232C SPECIFICATIONS
Pin No.
1
2
3
4
5
6
7
8
Code
DTR
DSR
TXD
GND
RXD
GND
NC
NC
Name
Data Terminal Ready
Data Set Ready
Transmitted Data
Ground
Received Data
Ground
-
-
Direction of data
Camera PC
-
-
-
-
8 7 6
5 4 3
2 1
RS-232C IN
1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. NC
8. NC 1. CD
2. RXD
3. TXD
4. DTR
5. GND
6. DSR
7. RTS
8. CTS
9. RI 1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. NC
8. NC 1. DTR
2. DSR
3. TXD
4. GND
5. RXD
6. GND
7. NC
8. NC
Personal Computer
D-Sub 9P
2nd.PTC-100S/110R(INPUT)
Mini DIN 8P
PTC-100S/110R(OUTPUT)
Mini DIN 8P
PTC-100S/110R (INPUT)
Mini DIN 8P