1OASBOX -
TECHNICAL MANUAL
7. ID ADDRESS SETUP
The setup procedure of
1OASBOX
module ID address is very easy: it is equipped with three rotary dip
switches corresponding, respectively, to hundreds (x100), tens (x10), and units (x1) of the code to set.
Please consider that code setup is fundamental for the correct identification of the module from the control
panel; the module will be detected as one output module or bell control module.
Example:
1OASBOX
module with ID code 035:
If you have to connect another module, set its address starting from 036.
IMPORTANT: do not use the ID addresses 0 (zero) and 255.
