1OASBOX -
TECHNICAL MANUAL
4. OVERVIEW AND WIRING DIAGRAM
WARNING: during wiring and installation procedure, make sure panel and loop are disconnected from power.
WARNING
Automatic activation function upon power failure is not active: the relay will not activate when the panel is switched
off for maintenance sessions.
It is strongly recommended not to enable automatic activation function when the output is connected to a device
that might cause damage if activated by mistake.
In this case, according to the application, the relay activation may be dangerous since it could, for example, trigger
explosive charges in skylight automatic opening systems.
When the activation of this function is required, open the module housing and cut the jumper wire as illustrated in
the following paragraphs.