24
|
www.gd-elmorietschle.com
© Gardner Denver Schopfheim GmbH, Gardner Denver Deutschland GmbH
Maintenance and repair
7.2.3 Oil separator element
WARNING
Risk of injury and burns due to hot lubricants!
Heavily contaminated oil separator elements lead to increased pump temperatures and
in extreme cases may cause the lubricating oil to ignite spontaneously. This can cause
burns and can damage to the machine.
Ø
Replace the oil separator element in time. It is depending on how contaminated the
discharged medium is.
NOTICE
Property damage due to faulty maintenance of the oil separator element!
Faulty maintenance can cause damage of the machine.
Ø
Ensure that the O-ring is correctly seated on the new oil separator element.
The oil separator element may be contaminated with particles of dirt when it has been running for a long
time (power consumption and pump temperature increase). Replace the device every 1500 – 3000 operating
hours because it is not possible to clean it.
Reduce the change intervals accordingly depending on how contaminated the discharged medium is.
a) Remove the cover and the gasket after undoing the screws. Unscrew the oil separator element and
replace.
b) Before fitting lightly oil the O-ring on the new oil removing device and tighten it to 15 Nm.
Re-assemble in reverse order.
Prematic AG, Märwilerstrasse 43, 9556 Affeltrangen www.prematic.ch
Tel. 071 918 60 60, Mail: [email protected]
