Elmo Rietschle 2BH1002-*AA53 series Operating Instructions Manual Download Page 4

Safety and Residual Risks 
 

 

 

610.44431.40.000 

4 / 30 

© Gardner Denver Deutschland GmbH

 

 

 

i

 

The motor of the G-BH100 including 
its connecting leads must be pro-
tected against electrostatic dis-
charge (ESD). 
Do not remove the ESD-prevention 
bag surrounding the lead ends until 
right before carrying out the electri-
cal connection (attaching the con-
nector, connecting to a terminal strip, 
or the like)! 
Carry out the electrical connection 
using the appropriate ESD-
prevention equipment! 

 
 

Residual Risks 

 

Danger zone: 

Hot surface. 

Hazard: 

Burning / scalding hazard. 

Protective measures: 

Attach warning sign "Warning of hot 
surface". 

 

Danger zone: 

Impeller of the pump can be rea-
ched through open suction or deliv-
ery branches. 

Hazard: 

  Severing of limbs. 

  Drawing-in and entanglement of 

hair. 

Protective measures: 

  Operation only with the pipes / 

hoses connected to the suction 
and delivery branches! 
In case of operation with open 
suction or delivery branches 
(drawing-in of gases from or dis-
charge of gases into the sur-
roundings) a piece of pipe or ho-
se 

with a length of at least 120 

mm must by all means

 be con-

nected to the branch in question! 

  Use a hair net! 

 

Danger zone: 

The vicinity of the unit during opera-
tion with open suction or delivery 
branches (drawing-in of gases from 
or discharge of gases into the sur-
roundings) 

Hazard: 

  Injuries due to contact with pres-

surised fluids or due to sudden 
acceleration of parts. 

  Injuries due to parts thrown out of 

the unit. 

Protective measures: 

  Ensure that fluids discharged into 

the surroundings are not expelled 
close to people (e.g. work sta-
tions on machines)! 

  During work on or near the unit 

wear personal protective equip-
ment! 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Summary of Contents for 2BH1002-*AA53 series































Reviews: