elmeg C46e, Description And Installation

Page: 85 / 128

4.10 Central speed dialing memory a/b-ISDN
With the central speed dialing memory (100 speed dialing numbers), an
available external ISDN connection is seized automatically after the speed dial
number is dialed and the call is made. The speed dialing number and the
number being called are defined during programming.
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
*#
Dial the code
*#
or or
#*
Dial the code
#*
.
==x))
Select a speed dialing number (00...99).
The external party you wish to call is then called.
4.11 Call waiting a/b-ISDN
During a call currently in progress, a second call is signaled optically or
acoustically (depending on terminal used). Internal call waiting is not possible
with a/b phones. Please consult the corresponding section in the operating
instructions for information on this function for ISDN phones.
If call waiting is signaled with a/b phones and you ignore this signal, it will
discontinue after around 30 seconds. With a/b phones you can inhibit call
waiting during your current calls by activating the ”barring call waiting” function.
Activating barring of call waiting
b
Lift up the receiver of your phone.
You will hear the internal dial tone.
Dial the code for barring of call waiting.
*58
Call waiting permitted.
or or
#58
Call waiting inhibited .
q
You will then hear the acknowledgement signal for about 1 se-
cond, followed by the internal dial tone.
a
Hang up your receiver.
O
peration
81