elmeg C46e, Description And Installation

Page: 63 / 128

4 Operation
4.1 elmeg CS100 system telephones CS100
You can also use elmeg CS100 system phones with the PABX system. This
requires no special programming. The PABX will recognize an activated system
telephone automatically.
You can configure the following function keys on the elmeg CS100 system
telephone:
•
distinct allocation of the external ISDN connection via the
MSN
•
connection key (exchange key)
•
line key (internal subscriber key)
•
Day/Night switchover of the switchable call modes
•
team keys
•
enter/delete team function
•
message/message inhibit
•
Simplex intercom/intercom inhibit
•
Boss/secretary function
The description, configuration and definition of these functions are provided in
the Operating Manual for the elmeg CS100 system telephone.
Messages can be placed through to system telephones elmeg CS100 and,
starting at software version 3, to the elmeg C90 and C100 ISDN telepho-
nes.
Simplex intercom can be implemented to elmeg CS100 system telephones
and, starting at software version 3, to elmeg C90 and C100 ISDN telepho-
nes.
4.1.1 Message
C/CS
The message function allows you to set up a connection from one system
telephone to another one, or to a team with several system telephones, without
this connection having to be actively accepted.
Messages are accepted automatically at the phones being called by activating
the speaker when:
•
the telephone is idle,
O
peration
59