14
Configuration
9. A configuration form will appear (see Figure 11). Change values according to the desired configuration.
Figure 11: EVC30 charging station configuration – Configuration
a) WiFi Network SSID
Select the WiFi network to which the EVC30 charging station is to connect.
Possible value: list of WiFi networks
Default value: N/A
b) WiFi network SSID
(Optional)
Manually enter the name of the WiFi network to which the EVC30 charging station is to connect.
Fill this box only if the target WiFi network does not appear for security reasons.
c) WiFi Network Password
Password for the WiFi network to which the EVC30 charging station is to connect. Leave this field blank
if the WiFi network to which the EVC30 charging station is to connect is not secured or open.
d) Charging Access Mode
Do not change this setting.
e) Load Shedding Function: Communication Channel ID
Channel ID between the EVC30 charging station and the EVCCS module.
Choose the same value as used in the configuration of the EVCCS module.
Possible value: between 0 and 20
Default value: 0 = disabled
10. Once values have been correctly adjusted, click
"
Submit
"
.
11. If more than one EVC30 charging station is to communicate with the EVCCS module,
repeat steps 1 through 8 for each EVC30 charging station.
C: FUNCTION CHECK
In order to confirm that communication between the EVCCS module and the EVC30 charging station(s) is properly
established, check the "Network Communication" LED’s status on the EVCCS module. Refer to the "Operation" section.
