Technical Support Line +44 (0)23 9269 6638 (Option 3)
PAK200360 Iss 03B Mar 2012
©2012 ELMDENE INTERNATIONAL LTD
Figure 1: Jumper Link options
C
ONNECTIONS
BT+
Positive connection to battery.
BT-
Negative battery connection. Connect black battery lead after power is applied.
ENG
Optional engineer input for quiet operation during installation or
maintenance. In engineer test mode apply a positive signal to
prevent self activation of siren by tamper condition (e.g. lid open).
H+
Permanent positive hold-off supply.
H-
Permanent negative hold-off supply.
TS
Tamper source: Connect to H– for single unit or last in line. Connect to TR of next unit for
multiple unit installation (see Figure 3.0)
Note each siren has a tamper resistance of 100Ω.
TR
Tamper return connection to control panel. (see Figures 2.0 and 3.0)
R-
Negative siren trigger.
ST-
Negative strobe trigger and supply.
3
