6
Technical Support: +44(0)23 9269 6638 (option 3)
PAK200546_03A Mar 2020 ©2020 ELMDENE INTERNATIONAL LTD
Tamper
21)
Connect tamper switch to appropriate inputs of control and indicating equipment (CIE).
Fig 8 Position of tamper assembly on ‘hinged lid’ style enclosures
Fig 9 Position of tamper assembly on ‘clam shell’ style enclosures
22)
Close the lid and fasten with screw supplied. Alternatively for ‘clam shell’ style fit the cover in place,
the correct orientation is with the cover retaining feature engaging over the bottom lip of the base,
fasten with screws supplied.
23)
With the unit mounted on the wall check that the rear tamper is not in a position that will affect its
operation, for example over a mortar course, recess or raised area on the wall.
Check that the tamper switch is:
CLOSED when the lid/cover is closed and the retaining screws are fitted,
OPEN when the retaining screws are removed and the lid/cover is open.
Use fine adjustment screw if necessary to align indicator with set point.
24)
Close the lid/cover and fasten.
25)
Re-check tamper circuit is closed at the control panel.
Lid Fixing Screw
(Sets tamper switch)
Tamper Switch Connections
Lid Fixing Screw
(Sets tamper switch)
Tamper switch Connections
Fine adjustment screw
Set position indicator
Set position indicator
Fine adjustment screw