ENGLISH
Putting into Operations
© Elma GmbH & Co KG
BA/Super-Elite/GB/0104
5
4 Putting
into
Operations
1. Compare voltage on type-plate (1) at the machine-hood (2)
with the voltage in your workshop.
Preparation
2. Place the unit onto a stable and dry surface
3. Set up the Machine with the heating tube (3) facing toward
you and unscrew the transport safety (5) in the bracket (6).
4. Turn the black turning handle (7) to the front, move the
bracket (6) upward till stop is reached. – By turning the
handle (7) to the back the bracket (6) is fixed.
5. Fill the glass jars (8) in the following order:
Fill glass jars (8) to the left of the heating tube (3) with elma
cleaning concentrate 1:9 till the first level mark. Dilute up to
the end of the hammered mark with ordinary tap-water.
Fill the second glass jar with distilled water and the
remaining third one with elma suprol spezial.
Filling the jars
After 50-60 cleanings the solution should be renewed at all
events.
The rinsing-solution in the last glass jar must always be kept
clean.
5
Working with the Elma Super Elite
5.1
Placing the watch parts to the cleaned
1. Put your right hand round the cleaning basket (10) whilst
detaching with your left hand by a light turn to the left, the
basket flange (11) with suction blades (11) form the
cleaning basket.
2. Push out the 3 basket insets in the body with your right
forefinger into the hollow of your left hand. Then place the
watch parts – which must be kept separate according to
size and degree of sensitiveness – into the various insets.
Place these inset again in a body into the basket with the
help of your left forefinger.
The small round box with cover in the middle of the inset is
for the smallest parts.
3. Attach the basket by slightly turning the flange to the right,
and lock the basket with the lock decide provided on the
flange plate.
4. Plug in the mains cable to a earth protective mains socket.
