Elma Elmasteam 8 Operating Instructions Manual Download Page 87

Page: 87 / 92

Safety / Maintenance / Repair Works

BA_Elmasteam_8_Vers.07.2016

8.5

Repair Works

Contact the supplier or manufacturer of this device in case of
repair works.

Repairs require expertise and may only be carried out by qualified
personnel.

WARNING

Energised parts in the device!

Electric shocks!

•

Unplug the unit from the mains supply before any

repair works.

CAREFUL

Escaping hot steam!

Scalding!

•

Only open the pressure tank screw cap on the filler

neck when the device is depressurised.

•

Only dismantle pressure-carrying parts in the

device when the device is depressurised!

•

Observe the gauge display (Chapter 3.6.3D)! The

device remains under pressure as long as one
segment is illuminated on the value scale on the
gauge.

•

Device can before opening to cool down.

CAREFUL

Hot surfaces!

Burns!

•

Device can before opening to cool down.

INFORMATION

Only original parts may be used for repair works.

The CE Conformity Declaration can become invalid in
certain instances by opening the device.

The manufacturer assumes no liability for incurred
damages due to unauthorised opening of the device.

If the device needs to be returned to a service centre
or to the manufacturer, then it must be ensured that
the device has been emptied and is transported in a
secure package.

Summary of Contents for Elmasteam 8





























































































Search results

Summary of Contents for Elmasteam 8

Reviews:

Related manuals for Elmasteam 8

Brands by name

Popular brands

Elma Elmasteam 8, Operating Instructions Manual

Search results

Summary of Contents for Elmasteam 8

Reviews:

Related manuals for Elmasteam 8

Brands by name

Popular brands