Product description
© Elma Schmidbauer GmbH
BA_ES xtra ST_EN_Vers.08.2016
17
4.10
Description of operating elements
Fig. 4.10 Operating panel
Key
on/off
switches the unit on and off.
When the unit is connected to the mains the LED in the key
lights up red (standby); the red LED goes out, unless another
key is activated within 1 min.
As soon as the key is activated the operating panel is ready for
operation and the LED in the key lights up green.
Key
heating
switches on the heating control. The LED in the
key lights up green when the heating is operating.
Setting of temperature
is possible in 5°C steps between 30°
–
80°C.
LED display temperature
for set and actual values of the
temperature in the bath. The set value is indicated by a
permanent red LED, the actual value is indicated by a flashing
LED.
LED display cleaning time
for set period and remaining
period. The set value is indicated by a permanent red LED, the
remaining cleaning period is indicated by a flashing LED.
Setting of cleaning time
Short period operation: 1; 2; 3; 4; 5;
10; 15; 20; 25; 30 min (automatic switch-off).
Permanent operation
∞
for continued operation. Switch-off by
hand.
For reasons of safety the unit is automatically switched off after
12 h permanent operation.
Ultrasonic frequency selector key
25 kHz / 45 kHz. The
selected frequency is indicated by a green LED in the key.
For
a more detailed description see also Section 6.4.
dynamic
button
for effective cleaning thanks to even power
distribution and amplification. The green LED lights up on the
key panel when activated.
Key ultrasonic operation
starts up the ultrasonic unit either by
hand (permanent green LED is on) or temperature-controlled
(LED flashes). For a description
see Sections 7.1
and
Key
pulse
adds ultrasonic power for difficult cleaning jobs.
When activated the green LED in the key is lighted.
A
B
C
D
E
F
G
H
I
J
C
H
I
J
A
B
D
E
F
G
