Cleaning media
© Elma GmbH & Co KG
BA/Elmasonic S/GB/0207
21
7.6
After the cleaning
When the cleaning process is finished rinse the cleaning items,
e.g. under the tap.
Drain the liquid as soon as it is dirty or when the unit is not
operated over a prolonged period of time. Certain residues and
types of contamination may destroy or damage the stainless
steel tank.
Use the quick-drain duct to drain the cleaning tank (
see section
4.9
).
Follow-up treatment
of cleaning items
Drain the unit
8
Cleaning media
The cleaning chemical to be used must be suitable for the use
in an ultrasonic bath to prevent damage to the tank or injuries to
the user. Use the recommended cleaners mentioned in
section
8.3
. Observe the restrictions to cleaners containing solvents
and aqueous cleaners mentioned
in sections 8.1 and 8.2.
For queries please contact the manufacturer or your supplier.
Damages caused by non-compliance with the instructions given
in
sections 8.1 and 8.2
will not be covered by the
manufacturer's warranty!
Exclusion of liability
8.1
Limitations of use of cleaners containing
solvents
Caution!
Never use flammable liquids or solvents directly in an
ultrasonic cleaning tank. Risk of fire and explosion!
Ultrasound increases the volume of vaporisation of liquids and
creates a very fine mist that can catch fire on any ignition
source at any time.
Do
not
fill potentially explosive substances and flammable
solvents
•
marked in compliance with the EEC directives by symbols
and safety warnings R 1 to R 9
•
or E, F+, F, O or R 10, R 11 or R 12 for flammable
substances
into the stainless steel tank for ultrasonic treatment.
