Ultrasonic cleaning process
If the actual temperature in the cleaning bath is too high for the
selected cleaning programme, the programme cannot be
started due to the integrated excess temperature protection. All
LEDs up to the LED showing the actual bath temperature are
flashing.
In order to start the required cleaning programme, the bath
temperature must cool down (wait until the bath has cooled
down or fill new water plus cleaning agent).
The temperature display
shows the actual temperature in the
cleaning bath.
Temperature range 20°C – 35°C: green LEDs
Temperature range 40°C:
yellow LED
Temperature range 45°C – 70°C: red LEDs
7.2
After the cleaning
When the cleaning process is finished rinse the cleaning items,
e.g. under the tap.
Drain the liquid as soon as it is dirty or when the unit is not
operated over a prolonged period of time. Certain residues and
types of contamination may destroy or damage the stainless
steel tank.
Use the quick-drain duct to drain the cleaning tank.
Excess temperature
protection
Follow-up treatment
of cleaning items
Drain the unit
© Elma Schmidbauer GmbH
17