Elma RCD Test
side 51
How to display firmware version
The instrument has to be turned off and both test tips disconnected from any circuit!
Press the
FUNC
key and keep it pressed, then turn the instrument on. Firmware version
(e.g. v1.0.0 and possibly additional service information) is displayed. After releasing the
keys the instrument enters the normal operating mode.
RESET of the instrument
If the instrument does not work correctly as described in this manual, we recommend
RESET:
The instrument has to be turned off and both test tips disconnected from any circuit! If you
turn the instrument on and it will not restore its proper function, then remove batteries – the
procedure is described in the Chapter 4.1., wait at least 10 s and insert set of new
batteries. If proper function will not be restored, then remove batteries again – the
procedure is described in the Chapter 4.1., put the instrument out of operation and secure
it against any unintended operation. Contact service.
Summary of Contents for FITESTpro
Page 16: ...Elma RCD Test side 16...
Page 33: ...Elma RCD Test side 33...
