ElmaLOG181T- ElmaLOG181TH
14
V.170320
24-03-2017 09:48:39
2 First Start & Begin Recording
Press button for 2 seconds, beeper sounds for 1 second
LED lights green for 2 seconds logging has started!
LED blinks green every 30 sec, during logging
2.1
Restart recording.
See 2. The logger is started by default by button and stopped by USB port plug-in,
measured values are plotted automatically to the PDF file to be printed and be saved.
The logger contains the PDF and corresponding data sets (DBF files can be opened with Excel)
Important!
If you need to save the measured values, you have to do that before a new logging begin as the existing file will be overwritten.
Note!
By use off Elma LogConnect * software, all these files will be automatically downloaded to your computer.
3 Stop recording and create PDF
Connect
ElmaLOG 181
to the USB port on the Windows Pc.
Beeper sounds for second.
The green LED blinks until the PDF file with the measured result is
created(can take up to 40 seconds)
Beeper sounds and LED stays green
The logger are shown as a removable drive on your Pc.
Se the PDF and DBF file.
Se the PDF report and save the file.
PDF file will be overwritten with next log start!
