ElmaLOG181T- ElmaLOG181TH
13
V.170320
24-03-2017 09:48:39
1. Introduction
Before operating, the data logger please read this manual carefully. You will get useful information for understanding all functions
ElmaLOG 181- series offers.
.
1.1
ElmaLOG 181 serien indeholder
Datalogger ElmaLOG 181
USB projection cap
Wall holder
2 screws and dowels
Battery 3,6V lithium ½ AA
(already inserted)
1.2
General advice
Check if the contents of the package is undamaged and complete.
Remove the protection foil above the start button and the two LEDs.
For cleaning the instrument, please do not use an abrasive cleaner only a dry or wet piece of soft cloth. Do not allow any liquid to
the interior of the device.
Please store the measuring instrument in a dry and clean place.
Avoid any force like shocks or pressure to the instrument.
No responsibility is taken for irregular or incomplete measuring values and their results; the liability for subsequent damages is
excluded!
1.3
Overview
1.
Start button
2.
LED green
3.
LED red
4.
Battery Case
5.
USB Connector
6.
USB Cover
7.
Wall holder
8.
Slits for sensor (only
ElmaLOG 181TH
)
9.
Protectivefoli
1.4
Scope of delivery and usage of ElmaLOG 181 series
ElmaLOG 181T/ElmaLOG 181TH
data logger are suitable for recording, alarm tracking, and display of temperature, humidity* and dew
point* (*only
ElmaLOG 181TH
) measurements. Areas of application include the monitoring of storage and transport conditions or other
temperature and moisture sensitive processes. The built-in USB connector connects without cables to all Windows PCs. A transparent
plastic cap protects the USB connector. The green LED flashes every 30 seconds during recording. The red LED is used to display limit
alarms or status messages (battery change ...etc.). The logger also has an internal buzzer that supports the user interface.
Moreover, the data logger has built-in real time clock and can store up to a maximum of 60,000 measurements in memory before it
stops logging.
1.5
For your safety
This product is exclusively intended for the field of application described above. It should only be used as described within these
instructions. Unauthorized repairs, modifications or changes to the product are prohibited.
1.6
Ready to use
ElmaLOG 181
series is already preset (see 5 default settings) and ready for start. It can be used immediately without any software!
1
.
3
.
2
.
4
.
5
.
6
.
9
.
8
.
7
.
Fig. A
GB
