Elma B-Scope 500
side 39
Reset function
If system halted unexpectedly, please press the RESET button on the leftside of the
instrument, thence, it will be reset. Instrument can be operated normally after power on it
again
.
Notices
1) The gooseneck should not be bended to a diameter less than 5 inch, or it will be
irreparable.
2) Take out the battery when the instrument is not in use for a long time to avoid
corruption caused by the battery fluid leakage.
3) Clean the camera before operation.
4) Use 3.7V Li battery.
5) To avoid electrical shock, the instrument and gooseneck should not contact with high
voltage objects during operation.
6) To avoid instrument damaged and user injured, the gooseneck cannot be inserted into
the rotational gear wheel.
