User Instruction
8
thoroughly cleaned and inspected on a regular basis. Clean and
inspect the hose before each use of the appliance. If there is
evidence of abrasion, wear, cuts, or leaks, the hose must be
replaced prior to the appliance being put into operation.
• LP Tank used must include a collar to protect the cylinder valve.
• The LP gas tank must have a listed overfilling prevention device
(OPD) and a QCCI or Type I (CGA791) LP gas tank connection.
• The LP gas tank should not be dropped or handled roughly.
• Tanks must be stored outdoors out of the reach of children. Do NOT
store in a building, garage, or any other enclosed area.
• Never store your LP gas tank where temperatures can reach over
125°F.
• Never keep a filled LP gas tank in a hot car or car trunk. Heat will
cause the gas pressure to increase, which may open the relief valve
and allow gas to escape.
• Place dust cap on valve outlet whenever the LP gas tank is not in
use. Only install the type of dust cap on the LP gas tank valve outlet
that is provided with the LP gas tank valve. Other types of caps or
plugs may result in leakage of propane.
• Do not store a spare LP gas tank under or near this gas appliance.
• Never fill the tank beyond 80 percent full.
• LP gas cylinders should only be filled by a certified LP gas dealer.
• The pressure regulator is set for 11 inches of water column
(pressure).
• Any guard or other protective device removed for servicing the
appliance must be replaced prior to operating the appliance.
• Installation and repair should be done by a qualified service person.
The appliance should be inspected before use and at least annually
by a qualified service person. More frequent cleaning may be
required as necessary. It is imperative that control compartment,
burners and circulating air passageways of the appliance be kept
clean.
• Do not attempt to disconnect the gas regulator from the tank or any
gas fitting while the outdoor appliance is in use.
Summary of Contents for EPL1020
Page 3: ......