38 SpeedCut
Know Your Responsibility
The Elliott SpeedCut warranty covers defects in material and workmanship. The following items
are considered the responsibility of the SpeedCut owner (some features listed may not apply to
your SpeedCut model). Elliott is not responsible for consequential costs due to the improper attention
of the below items. Please feel free to contact Elliott for technical support on any of these items.
Machine Installation and Initial Settings
• Air supply to unit.
• Power supply to the saw.
• Counterbalance Spring adjustment to control weight of saw head.
• Position of Blade Guide on the Beam (distance between the guides).
• Saw Blade speed.
• Saw Head Feed Rate Control.
• Selection of the appropriate blade pitch and type for each job.
• Secure clamping of vessel to be cut.
• Proper mixture of coolant and rate of flow (if applicable).
Alignments and Calibrations
• Alignment of the Blade Guides and the sweep of the Saw Head.
• Alignment of the Bandwheels for proper blade tracking.
• Calibration of Variable Bandspeed Indicator.
• Calibration of Blade Tensioning Device.
Normal Wear Items
• Saw Blade is covered for breakage only. It is not covered for wear or tooth stripping.
• Sawing Coolant.
• Blade Guide Bearings and Carbide Guide blocks.
• Blade Brush and Blade Brush Drive Belt.
• Motor Drive Belt.
Summary of Contents for SpeedCut SCT78
Page 2: ......
Page 40: ...This page intentionally left blank...
