Elliott ET850 Series, Operating And Maintenance Instructions Manual

Page: 5 / 22

ET850 Pneumatic Rolling Motors
5
SAFETY GUIDELINES
Read and save all instructions. Before use, be sure everyone using this machine reads and
understands this manual, as well as any labels packaged with or attached to the machine.
• Know Your Elliott Tool. Read this manual carefully to learn your tool’s application and
limitations as well as the potential hazards specific to this tool.
• Avoid Dangerous Environments. Do not use power tools in damp or wet locations
• Keep Work Area Clean and Well Lit. Cluttered, dark work areas invite accidents.
• Dress Properly. Do not wear loose clothing or jewelry. Wear a protective hair covering
to contain long hair. It is recommended that the operator wear safety glasses with
side shields or a full face shield eye protection. Gloves and water repellent, nonskid
footwear are also recommended. Keep hands and gloves away from moving parts.
• Use Safety Equipment. Everyone in the work area should wear safety goggles or
glasses with side shields complying with current safety standards. Wear hearing
protection during extended use, respirator for a confined space and a dust mask for
dusty operations. Hard hats, face shields, safety shoes, respirators, etc. should be
used when specified or necessary. Keep a fire extinguisher nearby.
• Before tool is connected to pressurized air, check that the throttle operates freely in
both directions and returns to the “OFF” position when released. Before changing
sockets or performing service on the motor, make sure that the air line is shut off and
drained to prevent operation if the throttle is engaged.
• Use The Right Tools. Do not force a tool or attachment to do a job or operate at a
speed it was not designed for.
• Use Proper Accessories. Use Elliott accessories only. Be sure accessories are properly
installed and maintained.
• Check for Damaged Parts. Inspect guards and other parts before use. Check for
misalignment, binding of moving parts, improper mounting, broken parts or any other
conditions that may affect operation. If abnormal noise or vibration occurs, turn the
tool off immediately and have the problem corrected before further use. Do not use a
damaged tool. Tag damaged tools “Do Not Use” until repaired. A damaged part should
CAUTION
!
CAUTION
!
Caution: Impact resistant eye protection must be
worn while operating or working near this tool.
Caution: Personal hearing protection is highly
recommended when operating or working near
this tool.