manualshive.com logo in svg

Ellie SENTRY 200, Operation Manual, Page: 22 / 22

Share
Download
Ellie SENTRY 200 Operation Manual Download Page 22

22

WARRANTY

Ellie, LLC (Ellie) warrants to the original purchaser that Ellie instruments will be of high standards of workmanship 

and materials and will be free of defects when shipped for a period of one year.

The  foregoing  is  Ellie’s  sole  warranty  with  respect  to  the  instrument.    THIS  WARRANTY  IS  EXPRESSLY  IN  LIEU 

OF  MERCHANTABILITY  OF  FITNESS  FOR  A  PARTICULAR  PURPOSE  AND  ALL  OTHER  EXPRESS  OR  IMPLIED 

REPRESENTAITONS AND WARRANTIES.

The warranties will not apply if it is determined by Ellie that the Instrument became defective due to accident or 

because the purchaser failed to exercise due responsibility, abused, misused, misapplied or permitted alterations of 

the Instrument, power surge, unusual voltage conditions, tampering, or damage during repair work or attempted 

repair  work  made  by  anyone  other  than  personnel  expressly  authorized  by  seller.    Removing  the  cover  of  the 

instrument voids this Warranty.

THE PURCHASER’S SOLE AND EXCLUSIVE REMEDY AGAINST Ellie shall be for the repair of replacement of defective 

original parts after it is determined by Ellie that the parts are indeed defective.  In addition, the above warranty does 

not cover any costs connected with removing or replacing any defective part or the costs to transport the defective 

part or instrument back to the manufacturer.  All replacement parts are sent out F.O.B. factory.

Nothing in the above warranties shall make Ellie liable for any incidental or consequential damages, including 

damages to any object used in this Instrument, injury to personal property, or any other form of economic loss which 

results from defective Instrument or any part thereof.

This Warranty will be governed by the laws of the State of Wisconsin.

This Warranty is not transferable, nor assignable by the purchaser.

CONTACTS

Corporate offices for Ellie LLC are located at:

Ellie LLC

W229 N1870 Westwood Dr
Waukesha, WI 53186, United States of America
United States of America
Phone:   

+1 (800) 556-6953

Fax:   

+1 (262) 364-2484

Summary of Contents for SENTRY 200























Reviews:

No comments