ellere EL100R, Owner'S Manual

Page: 18 / 27

18
REMOTE OPERATION
BUTTON FUNCTION ACTION
ON / OFF - Enables control panel functions.
Turns on flame effect.
Note - On first use, point the remote at the fire
unit and hold the on/off button to pair the re-
mote to the fire permanently.
1. Press once - Control panel illumi-
nates, flame effect and remote
screen turns on.
2. Press again - All functions turn
off.
FLAME COLOUR - Adjusts flame colour.
Note - Flame effect stays on until power button
is turned off.
1. Press once - Flame colour
changes.
2. Press again until desired colour
is selected.
FLAME BRIGHTNESS - Adjusts flame brightness.
Note - Flame effect stays on until power / off
button is pressed. Flame effect must be on for
heater to turn on.
1. Press once - Flame brightness
changes.
2. Press again until desired bright-
ness is selected.
FLAME SPEED - Adjusts flame speed.
Note - Three speeds to choose from.
1. Press once - Flame flicker speed
slows.
2. Press again until desired speed
is reached.
FUEL - BED COLOUR - Adjusts fuel - bed colour.
Note - Fuel - bed colour effect stays on until
power button is turned off.
1. Press once - Fuel - bed colour
changes.
2. Press again until desired colour
is reached.
FUEL - BED BRIGHTNESS - Adjusts fuel - bed
brightness.
1. Press once - Fuel - bed brightness
changes.
2. Press again until desired bright-
ness is selected.
THERMOSTAT - Turns heater on / off to main-
tain room at selected temperature.
1. Press once - Indicator lights up.
Temperature set at 18
o
C.
2. Press again until desired temper-
ature setting is reached.
HEATER - Turns heater on / off. 1. Press once - Low heat setting H1
activates and blows warm air.
2. Press again - High heat setting
H2 activates and blows hot air.
3. Press again - Turns heater off.
TIMER - Heater can be programmed to auto-
matically turn on / off at specified times during
the week.
1. Press once - ‘ Heat on ’ time / day
can be selected using ‘ Arrows ’
and confirmed using ’ OK ’.
2. Press again - ‘ Heat off ’ time/ day
can be selected using the
‘ Arrows ’ and confirmed using
‘ OK ’.