23
CONSOLLE ID 10
*** FAULT *** COMMUNICATION FAILURE
CONSOLLE ID 10
REMOTE PROGRAMMING ENABLED
When data communication between control panel and remote panel is interrupted, following
massage appears on the display and the buzzer is activated. To locally silence the buzzer, press
key “ACK” (Acknowledge)
When control panel is being programmed, following information will be shown on remote panel
display.
5.1
ADJUSTING THE DISPLAY CONTRAST
The display contrast can be adjusted as follows:
With the panel turned on, press the
“Lamps Test” and “
<
” keys at the same time.
The contrast adjustment bar and ambient temperature will appear on the display.
To increase the contrast, press the
“Lamps Test” and “
” keys at the same time.
To decrease the contrast, press the
“Lamps Test” and “
” keys at the same time.
To exit the adjustment menu, press the
“Lamps Test” and “
>
” keys at the same time.
The contrast adjustment value is lost when the panel is turned off.
