Elkron CT06, Installation Manual

Page: 27 / 36

CT06 27
to confirm
selection
• TONE CHECK
This function is used to enabled telephone line tone checks.
to confirm
selection
• ANSWER CHECK
Enabling this function a telephone number that correctly answers will not be recalled on
the next cycle.
Off : dialling followed by voice messages
will be carried out approximately 3
seconds after engaging the line.
On : the presence of the dial tone will
be checked when the line is engaged.
The number will be dialled in the
affirmative case. The presence of the
ring back tone is checked at the end
of the call. If no tone is received, the
call will be interrupted and will be
repeated later according to the
programmed cycles. Voice messages
are played if the tone is detected and
the answer check is disabled.
Off : the voice message is played
immediately after dialling without
waiting for the called user to answer.
On : the voice message is not played
unit the called user answers.
TONE CONTROL
DISABLED
TONE CONTROL
ENABLED
PSTN MENU
TONE CONTROL
ANSW. CHECK
DISABLED
ANSW. CHECK
ENABLED
PSTN MENU
ANSW. CHECK
Enabling the answer check is automatically enabled the tone check